To do this, follow the instructions below: Press the Windows key + R, then type DEVMGMT.MSC. Under Network Adapters, check if there are any options with question mark. Double click on one of them, then click on the Driver tab. It should give you the options to detect and install drivers.
How to Activate Microsoft Virtual WiFi Adapter. Click on Start, then click on Settings. Open the Network & Internet option. Go to the bottom and click on Network and Sharing Center. After that click on Change adapter settings. You will see the Ethernet connection tab, just right-click on it and click on Properties. Then tick mark the box next I’ve been using this laptop for a year and a half and I’ve never had to plug in any device just to connect to wifi. My Wireless Network Adapter is Qualcomm Atheros AR956x Wireless Network Adapter. I use an Acer Aspire E1-472G-54204G1. I use Windows 10. My Microsoft Wi-Fi Direct Virtual Adapters #5 and #6 also only appear as Hidden Devices. Reason: The network is disconnected by the user. The events before that are: 8000 - WLAN AutoConfig service started a connection to a wireless network. 8001 - WLAN AutoConfig service has successfully connected to a wireless network. 8006 - WLAN AutoConfig service has finished starting the hosted network. 1] via Device Manager. The Device Manager provides the easiest way to disable Microsoft WiFi Direct virtual adapter. 1. First, open the start menu, search for “Device Manager” and click on the first result to open the Device Manager. 2. After opening the Device Manager, expand the “Network adapters” section. Now, find the “Microsoft NDIS: "Miniport Microsoft Wi-Fi Direct Virtual Adapter #2, {4df2f069-f863-4a3e-9f6a-5fde5c0a4656}, had event Fatal error: The miniport has failed a power transition to operational power" Those are the most frequent/apparent around the times/dates that freezes occurred. Select IP Settings tab and uncheck the box beside Automatic metric. Then set the Interface metric value as 10. Click OK. Also, we would suggest you to update both Ethernet and Wi-Fi driver from Device Manager. Please refer this article to update the driver: Update drivers in Windows 10. On the top menu. Select show hidden devices. Go to network adapters and switch off Microsoft Wi-Fi Direct Virtual Adaptor. Go to "your model / type" network adaptor and select properties. Advanced settings. Set AP mode to Enable and check if Channel mode is set to 2.4 + 5G. This worked for me and 5Ghz is back online.
10383 posts · Joined 2013. #12 · Jul 17, 2017. Try disabling the firewall completely and see if that resumes the connection. If so, you will need to create a rule to allow that connection to bypass the firewall restrictions. Technology is sometimes a real nuisance, but it is our future so learn it and learn it well!!
I checked in Device Manager. As you can see, the Wireless LAN 802 adapter is greyed out, on the property pannel it says "this hardware is not connected to the computer code 45“ After doing quite some researches online, I have tried all the recommended solutions, including downloading the wireless adapter manually, running file and update

Method #1: Disable and Enable Microsoft Virtual WiFi Miniport Adapter. Open the Command Prompt as an administrator and type the following command, and hit ENTER: netsh wlan stop hostednetwork. Now, type in the following command and hit ENTER: netsh wlan set hostednetwork mode=disallow.

.
  • x2z548u9cq.pages.dev/117
  • x2z548u9cq.pages.dev/472
  • x2z548u9cq.pages.dev/326
  • x2z548u9cq.pages.dev/159
  • x2z548u9cq.pages.dev/471
  • x2z548u9cq.pages.dev/107
  • x2z548u9cq.pages.dev/287
  • x2z548u9cq.pages.dev/166

    • microsoft wifi direct virtual adapter windows 10 missing